|
What Should
You Do
In The
Case Of
Electricity
Cut:
Electricity Cut
In Daytime
Can Be
For The
Following
Reasons:
-
Overloading .
-
Short
circuit.
-
Not paying the
electricity bill.
-
A problem in the
network due to digging in areas where there is
electricity cables, or maintenance works by GEDCo.
In that case you should do the following:
-
Try to unplug all
electronics devices and turn on some of the
lights to know when the current got back in the
lines.
-
Check the control
board and if you see any of the half automatics
off turn it back on. In case the half automatic
turns back off by itself, do not play with any
of the cables and call a professional
technician.
-
If the half
automatic is on, that means that the bill has
not been paid.
-
If the reason is
not paying the bill, then you must pay it before
you get the electricity back.
-
If the bill is
paid and the half automatic is on, then there
must be a problem in the electricity network, or
maintenance works , you should contact your
provider (GEDCo.), the maintenance department
tel. 133 and inform them about this problem,
providing information as subscription number and
location of the house.
Electricity Cut
In Night
Time You
Should Do
The
Following Steps:
-
Unplug all devices
with big loads like air conditioners so that the
overload is contained and it make it easier to get
the current back on. It is also safer for all
devices from the dangers of being burned from the
sudden reconnecting of current.
-
Make sure that the
problem is only in your house so check to see if
your neighbors have electricity. In the case of
having the problem only at your house then it is due
to an overloading or to a short circuit.
-
Check the control
board and if you see any of the half automatics off
turn it back on. In case the half automatic turns
back off by itself, do not play with any of the
cables and call a professional technician to fix up
the problem. In the case of a problem with the whole
area, please call GEDCo. using 133.
TOP |
